Quick3D Ultrasint PA11 rCF
Ultrasint · PA11 powder for SLS
Get parts printed
Buy this materialStore coming soon
Overview
Bio-derived PA11 powder reinforced with recycled carbon fiber, aimed at very strong, rigid and lightweight parts.
Features
- Material type
- Engineering
- Brand family
- Ultrasint
- Polymer
- PA11
- Processing technology
- SLS
- Material form
- Powder
- Manufacturer
- Forward AM
- Reinforcements
- Carbon Fiber
Characteristics
- RecycledContains recycled content, as stated on the manufacturer datasheet.
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.09g/cm³ DIN EN ISO 1183-1
- 6.1x10³Ω/sq IEC 62631-3-2
Thermal
- 201°C ISO 11357, 10 K/min
- 166°C ISO 11357, 10 K/min
- 182°C ISO 75-2 (HDT/A 1.8 MPa)
Mechanical
- 6000MPa ISO 527-2
- 84MPa ISO 527-2
- 7.5% ISO 527-2
- 6.7kJ/m² DIN EN ISO 179-1
- 52kJ/m² DIN EN ISO 179-1
Versus other PA11
See where it ranks against the 8 other PA11 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Extended-TDS_Ultrasint_PA11-rCF.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Forward AM technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.