Quick3D Formlabs Nylon 11 Powder
Formlabs SLS · PA11 powder for SLS
Get parts printed
Buy this materialStore coming soon
Overview
A bio-based, ductile nylon 11 SLS powder for Fuse printers, aimed at tough, impact-resistant prototypes and small production runs.
Summarised from the Formlabs product page.
Features
- Material type
- Engineering
- Brand family
- Formlabs SLS
- Polymer
- PA11
- Processing technology
- SLS
- Material form
- Powder
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLP11B01
Certifications
- UL 94 HB (3.00 mm)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- HB UL 94 (3.00 mm)
Thermal
- 189°C ASTM D1525
- 46°C ASTM D648-16, 1.8 MPa
Mechanical
- 1600MPa ASTM D638-14 Type 1
- 49MPa ASTM D638-14 Type 1
- 40% ASTM D638-14 Type 1 (X/Y)
- 1400MPa ASTM D790-15
- 55MPa ASTM D790-15
Versus other PA11
See where it ranks against the 8 other PA11 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-nylon11-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.