Overview

The J35 Pro / J5-series version of Stratasys' tough white PolyJet material, which needs no post-curing. It targets parts that must look good and also hold up to functional testing.

Features

No post-cure needed
Combines visual appeal and functional performance
Tough
White color
Can be reinforced with RGD531S

Material type: Engineering
Brand family: PolyJet
Polymer: Photopolymer
Processing technology: PolyJet
Material form: Resin
Manufacturer: Stratasys
Reinforcements: None

Applications

Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.

Thermal

: 60 ± 1°C DMA, E''
: 46 ± 2°C ASTM D-648-06, 0.45 MPa

Mechanical

: 2229 ± 151MPa ASTM D638
: 39 ± 3MPa ASTM D638 (yield strength)
: 40 ± 10% ASTM D638
: 1772 ± 278MPa ASTM D790
: 57 ± 7MPa ASTM D790 (strength at break)
: 74D

Versus other Photopolymer

See where it ranks against the 217 other Photopolymer materials we stock.

Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.

Downloads

Technical data sheet (TDS)MDS_PJ_ToughONE_FullData_0226a.pdf Download
Quick3D summaryThis page as a printable PDF

Values from the Stratasys technical data sheet. Last updated 11 October 2026. Typical values, not guaranteed minimums — see the disclaimer below.

Stratasys ToughONE WhiteS