Quick3D Formfutura Engineering LCD Resin Flex 63A
Formfutura LCD Resin · Photopolymer resin for LCD/MSLA
Get parts printed
Buy this materialStore coming soon
Overview
A highly flexible, very transparent resin with a low 63A surface hardness and high elongation, intended for soft-touch and sealing parts.
Summarised from the Formfutura product page.
Features
- Material type
- Flexible
- Brand family
- Formfutura LCD Resin
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Formfutura
- Reinforcements
- None
Characteristics
- FlexibleRubber-like material that bends and springs back.
Applications
- Seals and gaskets
- Soft touch applications
- Wearables
- Functional prototyping
- Short-run manufacturing
- Flexible, rubber-like parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.18g/cm³
Mechanical
- 1.7MPa ASTM D638M
- 50–80% ASTM D638M
- 63A ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formfutura-engineering-lcd-resin-flex-63a-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formfutura technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.