Quick3D Stratasys MED615RGD Biocompatible Opaque
PolyJet · Photopolymer resin for PolyJet
Get parts printed
Buy this materialStore coming soon
Overview
An ivory, opaque, rigid biocompatible PolyJet material for medical parts that touch the body. It is rated for permanent skin contact and short-term contact with mucosa, tissue and bone, and can be gamma, steam or EtO sterilised.
Features
- Material type
- Specialty
- Brand family
- PolyJet
- Polymer
- Photopolymer
- Processing technology
- PolyJet
- Material form
- Resin
- Manufacturer
- Stratasys
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.17 – 1.18g/cm³ ASTM D792 (polymerized)
Thermal
- 52 – 54°C DMA E
- 45 – 50°C ASTM D-648-07, 1.82 MPa
Mechanical
- 2300 – 3300MPa ASTM D-638-04
- 55 – 65MPa ASTM D-638-03
- 10 – 25% ASTM D-638-05
- 2300 – 3300MPa ASTM D-790-04
- 80 – 100MPa ASTM D-790-03
- 83 – 86D Scale D
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)MDS_PJ_MED615RGD_0524a.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Stratasys technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.