Quick3D Overview
Stratasys' ABS filament for FDM printers, offering the strength and toughness of ABS in a lightweight, resilient material. It is aimed at most general-purpose 3D printing jobs.
Features
- Material type
- Engineering
- Brand family
- FDM
- Polymer
- ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Stratasys
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.05g/cm³ Specific gravity, ASTM D257 (as printed), @ 23 °C
Thermal
- 105.2°C ASTM D7426, inflection point
- 100.0°C ASTM D648 Method B, 264 psi
Mechanical
- 2400 ± 80MPa ASTM D638
- 28.1 ± 0.58MPa ASTM D638 (strength at break)
- 8.1 ± 1.5% ASTM D638
- 2220 ± 37MPa ASTM D790, Procedure A
- 58.7 ± 0.54 (at 5% strain)MPa ASTM D790, Procedure A
Electrical
- 2.64 ASTM D150, 1 kHz (XY)
Versus other ABS
See where it ranks against the 21 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)MDS_FDM_ABS-M30_0925a.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Stratasys technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.