Quick3D 3D4Makers ABS Kevlar
3D4Makers · ABS filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
ABS filament compounded with aramid (Kevlar) fibres for better dimensional stability, low warping and lower weight than standard ABS.
Summarised from the 3D4Makers product page.
Features
- Material type
- Engineering
- Brand family
- 3D4Makers
- Polymer
- ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3D4Makers
- Reinforcements
- Aramid (Kevlar) fibre
Physical
- 1.05g/cm³ ISO 1183
Thermal
- 95°C ISO 306
- 75°C ISO 75, 1.81 MPa, annealed
Mechanical
- 2350MPa ISO 527 (1 mm/min)
- 35MPa ISO 527-1
- 6.1kJ/m² ISO 179-1eA
- 14kJ/m² ISO 179-1eU
Versus other ABS
See where it ranks against the 21 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)3D4Makers-abs-kevlar-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3D4Makers technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.