Quick3D Somos WaterShed XC 11122
Somos · Photopolymer resin for SLA
Get parts printed
Buy this materialStore coming soon
Overview
A widely used, optically clear SLA resin with a smooth finish and good water resistance that mimics clear thermoplastics such as ABS and PBT. It is used for durable concept models, functional testing, RTV and investment-casting patterns.
Features
- Material type
- Standard
- Brand family
- Somos
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Somos
- Reinforcements
- None
Applications
- Consumer products
- Fluid/air flow analysis
- Duct work
- Investment casting
- Lenses
- Packaging
- RTV patterns
- Durable concept models
- Wind tunnel testing
- Prototypes and concept models
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- ~1.12g/cm³ Liquid resin, @ 25 °C
Thermal
- 43°C ASTM E1545-00
- 49°C ASTM D648, 1.81 MPa
Mechanical
- 2770MPa ASTM D638M
- 50.4MPa ASTM D638M (at break)
- 15.5% ASTM D638M
- 2205MPa D2240 (as printed)
- 68.7MPa ASTM D790M
Electrical
- 15.9kV/mm ASTM D149-97a
- 3.8 ASTM D150-98
- 3.5 ASTM D150-98
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)MDS_SL_Somos-WaterShed-XC-11122_0123a.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Somos technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.