Quick3D Overview
A translucent, semi-flexible SLA resin that mimics polypropylene and offers good water and temperature resistance. It lets you see inside parts and suits fluid-flow analysis, electrical casings, automotive parts and snap-fit testing.
Features
- Material type
- Engineering
- Brand family
- Somos
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Somos
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- ~1.13g/cm³ Liquid resin, @ 25 °C
Mechanical
- 1350MPa ASTM D638M
- 31MPa ASTM D638M
- 1380MPa D2240 (as printed)
- 45MPa ASTM D790M
- 81D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)MDS_SL_Somos-9120_0123a.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Somos technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.