Quick3D Siraya Tech Simple V2
Siraya Tech · Photopolymer resin for LCD/MSLA
Get parts printed
Buy this materialStore coming soon
Overview
An updated low-viscosity, low-odor water-washable resin that holds up to long water soaking and gives low-shrinkage, detailed prints on MSLA, LCD and DLP printers.
Summarised from the Siraya Tech product page.
Features
- Material type
- Standard
- Brand family
- Siraya Tech
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Siraya Tech
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.2g/cm³
Thermal
- 60°C 0.455 MPa
Mechanical
- 750MPa ASTM D638
- 27MPa ASTM D638
- 10% ASTM D638
- 950MPa ASTM D790
- 78D
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)simple-water-washable-v2-tds Download
- Quick3D summaryThis page as a printable PDF
Values from the Siraya Tech technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.