Quick3D Siraya Tech Blu
Siraya Tech · Photopolymer resin for LCD/MSLA
Overview
A tough engineering resin that balances hardness with impact resistance and resists brittle failure when dropped. It is intended for functional prototypes, jigs and load-bearing parts, with skin-contact biocompatibility when post-processed correctly.
Summarised from the Siraya Tech product page.
Features
- Material type
- Engineering
- Brand family
- Siraya Tech
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Siraya Tech
- Reinforcements
- None
Certifications
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
Ask us for the certificate if you need it for an audit.
Applications
- Engineering prototypes
- Mechanical aids
- Fixtures and jigs
- Medical devices
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.15g/cm³ ASTM 792
Thermal
- 70°C ASTM D648, 0.455 MPa
Mechanical
- 1800MPa ASTM D638
- 50MPa ASTM D638
- 32% ASTM D638
- 1750MPa ASTM D790
- 80D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)blu-tough-resin-tds-for-regular-blu Download
- Quick3D summaryThis page as a printable PDF
Values from the Siraya Tech technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.