Quick3D Siraya Tech Blu Nylon Mecha
Siraya Tech · Photopolymer resin for LCD/MSLA
Overview
A tough, hard engineering resin with higher impact and wear resistance than standard Blu and less friction dust, certified biocompatible under ISO 10993-10.
Summarised from the Siraya Tech product page.
Features
- Material type
- Engineering
- Brand family
- Siraya Tech
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Siraya Tech
- Reinforcements
- None
Certifications
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
Ask us for the certificate if you need it for an audit.
Applications
- Gear and joint parts
- Engineering prototypes
- Mechanical aids
- Fixtures and jigs
- Medical devices
- Load-bearing parts
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.25g/cm³ ASTM 792
Thermal
- 65°C ASTM D648, 0.455 MPa
Mechanical
- 1900MPa ASTM D638
- 58MPa ASTM D638
- 45% ASTM D638
- 1830MPa ASTM D790
- 73D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)wear-resistant-blu-nylon-mecha-tds Download
- Quick3D summaryThis page as a printable PDF
Values from the Siraya Tech technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.