Quick3D Siraya Tech Blu Lava
Siraya Tech · Photopolymer resin for LCD/MSLA
Overview
A PC-like, high-strength and stiff engineering resin with good impact resistance that can be tapped. It is aimed at engineering and medical-device prototypes and end-use parts.
Summarised from the Siraya Tech product page.
Features
- Material type
- Engineering
- Brand family
- Siraya Tech
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Siraya Tech
- Reinforcements
- None
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
Ask us for the certificate if you need it for an audit.
Applications
- Engineering prototypes
- End-use parts
- Medical device prototypes
- Parts that require both strength and precision
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.15g/cm³
Thermal
- 75°C 0.455 MPa
Mechanical
- 2500MPa ASTM D638
- 60MPa ASTM D638
- 12% ASTM D638
- 2600MPa ASTM D790
- 65MPa ASTM D790
- 87D
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)blu-tough-blu-lava-black-tds Download
- Quick3D summaryThis page as a printable PDF
Values from the Siraya Tech technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.