Quick3D Polymaker PolyCore ABS-5022
PolyCore · ABS pellets for Pellet extrusion
Overview
ABS pellets with 20% carbon fiber, giving strength, stable dimensions, long service life and good heat conduction with fairly low thermal expansion. Aimed at large pellet-printed parts needing durability and some heat resistance.
Summarised from the Polymaker product page.
Features
- Material type
- Engineering
- Brand family
- PolyCore
- Polymer
- ABS
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- Carbon Fiber 20%
Characteristics
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.20g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 11g/10 min 220 °C, 10 kg
Thermal
- 101°C DSC, 10 °C/min
- 113°C ASTM D1525 (ISO 306 GB/T 1633)
- 98°C ISO 75 1.8MPa
Mechanical
- 8093 ± 1457MPa ASTM D638 (ISO 527, GB/T 1040)
- 90 ± 3.0MPa ASTM D638 (ISO527, GB/T 1040)
- 0.7 ± 0.2% ASTM D638 (ISO527, GB/T 1040)
- 9742.4 ± 542MPa ASTM D790 (ISO 178, GB/T 9341)
- 128.7 ± 9.4MPa ASTM D790 (ISO 178, GB/T 9341)
- 47 ± 4.6kJ/m² ASTM D256 (ISO 179, GB/T 1043)
Versus other ABS
See where it ranks against the 21 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)PolyCore-ABS-5022_TDS_EN_V2.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.