Quick3D Polymaker PolyCore ABS-5012
PolyCore · ABS pellets for Pellet extrusion
Get parts printed
Buy this materialStore coming soon
Overview
ABS pellets reinforced with 20% glass fiber, offering cost-effective printing with balanced mechanical properties. Intended for pellet-fed printing of tooling at low to moderate temperatures and other general uses.
Summarised from the Polymaker product page.
Features
- Material type
- Engineering
- Brand family
- PolyCore
- Polymer
- ABS
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- Glass Fiber 20%
Characteristics
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
- Low-Temperature Tooling
- Concrete Molds
- General Prototyping
- Functional, load-bearing parts
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.21g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 12.7g/10 min
Thermal
- 96°C DSC, 10 °C/min
- 109°C ASTM D1525 (ISO 306 GB/T 1633)
- 96°C ISO 75 1.8MPa
Mechanical
- 3994 ± 159MPa ASTM D638 (ISO 527, GB/T 1040)
- 74.6 ± 3.8MPa ASTM D638 (ISO527, GB/T 1040)
- 9.7 ± 0.7% ASTM D638 (ISO527, GB/T 1040)
- 5410 ± 519MPa ASTM D790 (ISO 178, GB/T 9341)
- 107.2 ± 4.4MPa ASTM D790 (ISO 178, GB/T 9341)
- 9.9 ± 1.6kJ/m² ASTM D256 (ISO 179, GB/T 1043)
Versus other ABS
See where it ranks against the 21 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)PolyCore-ABS-5012_TDS_EN_V2.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.