Quick3D Polymaker PETG
Polymaker · PETG filament for FFF
Overview
Fast-printing PETG with a high-flow formula that still delivers good interlayer strength, little warping and a clean finish. Tougher and less brittle than PLA with chemical resistance, it prints without an enclosure but must be kept dry.
Summarised from the Polymaker product page.
- Material type
- Standard
- Brand family
- Polymaker
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Certifications
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.30g/cm³ ISO1183, GB/T1033
- 16.3g/10 min 230°C, 2.16 kg
Thermal
- 71.24°C DSC, 10°C/min
- 405.49°C TGA, 20°C/min
- 75°C ISO 306, GB/T 1633
- 69°C ISO 75 0.45MPa
Mechanical
- 2311.11 ± 92.41MPa ISO 527, GB/T 1040
- 47.96 ± 4.88MPa ISO 527, GB/T 1040
- 9.33 ± 6.57% ISO 527, GB/T 1040
- 2277.34 ± 198.09MPa ISO 178, GB/T 9341
- 80.08 ± 3.53MPa ISO 178, GB/T 9341
- 4.95 ± 0.55kJ/m² ISO 179, GB/T 1043
- 20.24 ± 3.95 kJ/m² ISO 179, GB/T 1043
Chemical resistance
Versus other PETG
See where it ranks against the 19 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)TDS_Polymaker_PETG_V2.0_2025-11-17.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.