Quick3D 3DXTECH CarbonX Carbon Fiber PETG
CarbonX · PETG filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
PETG reinforced with engineering-grade carbon fiber, quoted at up to 2.5x the stiffness of plain PETG with low odor and moisture uptake. Suits structural and end-use parts; requires a hardened steel nozzle.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.34g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 80°C DSC
- 77°C ISO 75, 0.45 MPa
Mechanical
- 5230MPa ISO 527
- 56MPa ISO 527
- 3% ISO 527
- 5740MPa ISO 178
- 80MPa ISO 178
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)CarbonX_CF_PETG_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.