Quick3D 3DXTECH 3DXSTAT ESD-PETG
3DXSTAT · PETG filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
PETG filament made ESD-safe with carbon nanotubes, aiming for 10^4 to 10^9 ohm surface resistance. Adds better chemical resistance and lower moisture uptake than ABS for static-sensitive parts.
Summarised from the 3DXTECH product page.
Features
- Material type
- Specialty
- Brand family
- 3DXSTAT
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.28g/cm³ ISO 1183
- 10⁷ - 10⁹Ω/sq ASTM D257
Thermal
- 80°C DSC
- 75°C ISO 75, 0.45 MPa
Mechanical
- 1800MPa ISO 527
- 50MPa ISO 527
- 13% ISO 527
- 1780MPa ISO 178
- 74MPa ISO 178
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)3DXSTAT_ESD-PETG-TDS-v03.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.