Quick3D Polymaker HT-PLA
Polymaker · PLA filament for FFF
Overview
Heat-resistant PLA that keeps its shape at elevated temperatures yet prints on standard PLA settings with no annealing needed. Supports fast printing and comes in a range of colors, from prototypes to finished parts.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- Polymaker
- Polymer
- PLA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- BiobasedMade mainly from renewable plant sources. Shown for PLA-based materials — PLA is produced from plant sugars such as corn or sugarcane.
Certifications
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.29 g/cm³ at 23 ISO1183, GB/T1033
- 22.6g/10 min 210°C, 2.16 kg
Thermal
- 59.8°C DSC, 10°C/min
- 177.23°C DSC, 10°C/min
- 77.21°C DSC, 10°C/min
- 335.94°C TGA, 20°C
- 156.2°C (as printed) ISO 306,GB/T 1633
- 58.6°C (as printed) ISO 75, 1.8MPa
Mechanical
- 2945.75 ± 77.35MPa ISO 527, GB/T 1040
- 42.86 ± 0.76MPa ISO 527, GB/T 1040
- 2.80 ± 0.26% ISO 527, GB/T 1040
- 2893.46 ± 53.15MPa ISO 178, GB/T 9341
- 74.04 ± 0.66MPa ISO 178, GB/T 9341
- 4.94 ± 0.31 kJ/m² ISO 179, GB/T 1043
Chemical resistance
Versus other PLA
See where it ranks against the 34 other PLA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)TDS_Polymaker_HT-PLA_V1.3_2025-12-10_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.