Quick3D 3DXTECH 3DXSTAT ESD-PLA
3DXSTAT · PLA filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Carbon nanotube-filled PLA giving ESD protection (10^4 to 10^9 ohm target) while keeping PLA's easy, low-odor printing without a heated bed or enclosure. Suits static-sensitive parts made on desktop printers.
Summarised from the 3DXTECH product page.
Features
- Material type
- Specialty
- Brand family
- 3DXSTAT
- Polymer
- PLA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- BiobasedMade mainly from renewable plant sources. Shown for PLA-based materials — PLA is produced from plant sugars such as corn or sugarcane.
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.26g/cm³ ISO 1183
- 10⁷ - 10⁹Ω/sq ASTM D257
Thermal
- 60°C DSC
- 55°C ISO 75, 0.45 MPa
Mechanical
- 2560MPa ISO 527
- 55MPa ISO 527
- 10% ISO 527
- 2980MPa ISO 178
- 95MPa ISO 178
Versus other PLA
See where it ranks against the 34 other PLA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)3DXSTAT_ESD_PLA_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.