Quick3D Phrozen Water-Washable Tough
Phrozen Water-Washable · Photopolymer resin for LCD/MSLA
Get parts printed
Buy this materialStore coming soon
Overview
A tougher water-washable resin in gray and white that can be cleaned with water after printing.
Summarised from the Phrozen product page.
Features
- Material type
- Standard
- Brand family
- Phrozen Water-Washable
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Phrozen
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 43.9–46.1°C ASTM D648, 0.45 MPa
Mechanical
- 863.4–993MPa ASTM D638
- 22.4–22.9MPa ASTM D638
- 16.3–23.1% ASTM D638
- 75-80D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Phrozen-Water-Washable_Tough_Series_EH_20251104.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Phrozen technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.