Overview

A general-purpose LCD printer resin sold in four bright colours (Peach, Lime, Pumpkin and Lemon) that share one set of typical values.

Summarised from the Phrozen product page.

Material type: Standard
Brand family: Phrozen Neon
Polymer: Photopolymer
Processing technology: LCD/MSLA
Material form: Resin
Manufacturer: Phrozen
Reinforcements: None

Applications

Prototypes and concept models

Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.

Thermal

: 70°C ASTM D648, 0.45 MPa

Mechanical

: 800–1150MPa ASTM D638
: 19–23MPa ASTM D638
: 3–12% ASTM D638
: 72-82D ASTM D2240

Versus other Photopolymer

See where it ranks against the 217 other Photopolymer materials we stock.

Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.

Downloads

Technical data sheet (TDS)Phrozen-Neon_EN_20260731.pdf Download
Quick3D summaryThis page as a printable PDF

Values from the Phrozen technical data sheet and product page. Last updated 11 October 2026. Typical values, not guaranteed minimums — see the disclaimer below.

Phrozen Neon