Quick3D Phrozen EL400
Phrozen Elastomer · Photopolymer resin for LCD/MSLA
Get parts printed
Buy this materialStore coming soon
Overview
A gray elastomeric resin for LCD printers that prints rubber-like parts with high elongation and a Shore A hardness around 70-75.
Summarised from the Phrozen product page.
- Material type
- Flexible
- Brand family
- Phrozen Elastomer
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Phrozen
- Reinforcements
- None
Characteristics
- FlexibleRubber-like material that bends and springs back.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Mechanical
- 6.3MPa ASTM D412
- 391% ASTM D412
- 70-75A ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Phrozen-EL400_EH_20250820.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Phrozen technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.