Quick3D Monocure3D Splint Soft
Monocure3D Dental · Photopolymer resin for LCD/MSLA
Get parts printed
Buy this materialStore coming soon
Overview
The softer variant of Monocure3D's clear splint resin, for printing night guards, occlusal splints and bite plates on DLP and MSLA printers.
Summarised from the Monocure3D product page.
Features
- Material type
- Specialty
- Brand family
- Monocure3D Dental
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Monocure3D
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Mechanical
- 46–52MPa ASTM D790 (as printed)
- 105% ASTM D638
- ~1000–1400MPa ASTM D790
- 45MPa ASTM E1356 (as printed)
- 85D ASTM D2240
Versus other Photopolymer
See where it ranks against the 205 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Monocure3D-splint-biocompatible-dental-resin-ultra-clear.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Monocure3D technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.