Quick3D Formlabs BioMed Amber Resin
Formlabs SLA · Photopolymer resin for SLA
Overview
A rigid, biocompatible resin for medical parts that need short-term patient contact. Printed parts tolerate common disinfection and sterilization methods.
Summarised from the Formlabs product page.
Features
- Material type
- Specialty
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLBMAM01
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-11Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 13485 manufactured
Ask us for the certificate if you need it for an audit.
Applications
- Medical devices and device components
- Research and development
- Surgical planning and implant sizing tools
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 65°C ASTM D648-18 (Method B), 1.8 MPa
Mechanical
- 2900MPa ASTM D638-10 (Type IV)
- 73MPa ASTM D638-10 (Type IV)
- 12% ASTM D638-10 (Type IV)
- 2500MPa ASTM D790-15 (Method B)
- 103MPa ASTM D790-15 (Method B)
- 67D ASTM D2240-15 (Type D)
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-biomedamber-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.