Quick3D Formlabs BioMed Black Resin
Formlabs SLA · Photopolymer resin for SLA
Overview
A matte, opaque black medical-grade resin for rigid biocompatible parts with long-term skin or short-term mucosal contact. Its high contrast and fine detail suit visualization and drug-delivery uses.
Summarised from the Formlabs product page.
Features
- Material type
- Specialty
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLBMBL01
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
- USP Class VIPassed USP Class VI tests for plastics used in medical devices.
- ISO 13485 manufactured
Ask us for the certificate if you need it for an audit.
Applications
- Medical devices and device components
- Biocompatible molds, jigs, and fixtures
- End-use parts requiring patient contact
- Consumer goods
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 49.4°C ASTM D648-18 (Method B), 1.8 MPa
Mechanical
- 1500MPa ASTM D638-14 (Type IV)
- 36MPa ASTM D638-14 (Type IV)
- 14% ASTM D638-14 (Type IV)
- 1600MPa ASTM D790-15 (Procedure B)
- 57MPa ASTM D790-15 (Procedure B), stress at 5% strain
- 77D ASTM D2240-15 (Type D)
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-biomedblack-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.