Quick3D Monocure3D Guide
Monocure3D Dental · Photopolymer resin for LCD/MSLA
Overview
A transparent Class I biocompatible resin for printing dental implant surgical guides that can be steam-autoclaved after post-curing.
Summarised from the Monocure3D product page.
Features
- Material type
- Specialty
- Brand family
- Monocure3D Dental
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Monocure3D
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
Certifications
- ARTG No. 398012
- Biocompatible Class ITested for biological safety when in contact with the human body (ISO 10993).
Ask us for the certificate if you need it for an audit.
Applications
- Dental surgical guides for implant placement
- Pilot and sleeve-guided surgical templates
- Endodontic and periodontal guides
- Surgical planning models
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 130°C ASTM E1356 (as printed), 0.45 MPa
Mechanical
- 47MPa ASTM D638
- 3.0% ASTM D638
- 120MPa ASTM D790
- 84D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Monocure3D-guide-biocompatible-dental-resin-clear.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Monocure3D technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.