Overview

A wax-free investment casting resin for burnout casting of dental frameworks and other fine-detail castings, leaving almost no ash after burnout.

Summarised from the Monocure3D product page.

Features

Wax-free formula
Clean burnout, residue <0.003%
Burnout cycles as short as 6 hours
Minimal expansion during burnout
Compatible with MSLA printers

Material type: Specialty
Brand family: Monocure3D Dental
Polymer: Photopolymer
Processing technology: LCD/MSLA
Material form: Resin
Manufacturer: Monocure3D
Reinforcements: None

Applications

Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.

Thermal

: 62°C ASTM D648

Mechanical

: 1500MPa ASTM D638
: 40MPa ASTM D638
: 3% ASTM D638
: 88D ASTM D2240

Versus other Photopolymer

See where it ranks against the 217 other Photopolymer materials we stock.

Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.

Downloads

Technical data sheet (TDS)Monocure3D-cast-dental-investment-casting-resin.pdf Download
Quick3D summaryThis page as a printable PDF

Values from the Monocure3D technical data sheet and product page. Last updated 11 October 2026. Typical values, not guaranteed minimums — see the disclaimer below.

Monocure3D CAST