Quick3D Formlabs Rigid 10K Resin
Formlabs SLA · Photopolymer resin for SLA
Overview
A heavily glass-filled engineering resin and the stiffest in the Formlabs range, for precise industrial parts that must carry load without bending. It has a matte finish and resists heat and chemicals well.
Summarised from the Formlabs product page.
Features
- Material type
- Engineering
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- Glass-filled
- Manufacturer SKU
- FLRG1001, FLRG1011
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Certifications
- UL 94 HBFlammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
Ask us for the certificate if you need it for an audit.
Applications
- Short-run injection molds and inserts
- Heat resistant and fluid exposed components, jigs, and fixtures
- Aerodynamic test models
- Simulating glass and fiber-filled thermoplastics
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- HB UL 94 Section 7 (3 mm)
- 6.9 x 10¹³Ω/sq ASTM D257-14
Thermal
- 82°C ASTM D648-16, 1.8 MPa
Mechanical
- 10000MPa ASTM D638-14
- 65MPa ASTM D638-14
- 1% ASTM D638-14
- 9000MPa ASTM D790-15
- 126MPa ASTM D790-15
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-rigid10k-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.