Quick3D Formlabs IBT Flex Resin
Formlabs SLA · Photopolymer resin for SLA
Overview
A flexible, tear-resistant, translucent Class I biocompatible dental resin for printing indirect bonding trays and composite restoration guides.
Summarised from the Formlabs product page.
Features
- Material type
- Flexible
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLIBFL01
Characteristics
- FlexibleRubber-like material that bends and springs back.
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-23Tested for biological safety when in contact with the human body (ISO 10993).
- EN ISO 13485:2016
- EN ISO 14971:2012
Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Mechanical
- 8MPa ASTM D412
- 7.2MPa ASTM D412
- 135% ASTM D412
- 77 - 80A ASTM D2240
Versus other Photopolymer
See where it ranks against the 205 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-ibtflex-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.