Quick3D Formlabs High Temp Resin
Formlabs SLA · Photopolymer resin for SLA
Get parts printed
Buy this materialStore coming soon
Overview
A heat-resistant resin with the highest HDT of the Formlabs range (238 °C at 0.45 MPa after thermal cure), for detailed parts exposed to high temperatures.
Summarised from the Formlabs product page.
Features
- Material type
- Engineering
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLHTAM02
Applications
- Hot air, gas, and fluid flow
- Heat resistant mounts, housings, and fixtures
- Molds and inserts
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 78°C ASTM D648-16, 1.8 MPa
Mechanical
- 2800MPa ASTM D638-14
- 58MPa ASTM D638-14
- 3.3% ASTM D638-14
- 2600MPa ASTM D790-15
- 95MPa ASTM D790-15
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-hightemp-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.