Quick3D Formlabs ESD Resin
Formlabs SLA · Photopolymer resin for SLA
Get parts printed
Buy this materialStore coming soon
Overview
A tough static-dissipative resin for printing tooling, jigs, fixtures and housings that protect sensitive electronics from electrostatic discharge.
Summarised from the Formlabs product page.
Features
- Material type
- Engineering
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLESDS01
Characteristics
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
Applications
- Anti-static prototypes and end-use parts
- Tooling, jigs, and fixtures for electronics manufacturing
- Housings for sensitive electronics
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.116g/cm³ ASTM D792
- 10⁵ - 10⁸Ω/sq ANSI/ESD 11.11
Thermal
- 54.2°C ASTM D648-18, 1.8 MPa
Mechanical
- 1937MPa ASTM D638-14
- 44.2MPa ASTM D638-14
- 12% ASTM D638-14
- 1841MPa ASTM D790-17
- 61MPa ASTM D790-17
- 90D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-esd-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.