Quick3D Formlabs Custom Tray Resin
Formlabs SLA · Photopolymer resin for SLA
Overview
A dental resin for printing accurate custom impression trays for implants, dentures, crowns and bridges. It prints at 200 micron layers for fast, high-throughput production.
Summarised from the Formlabs product page.
Features
- Material type
- Specialty
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLCTBL01
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Mechanical
- >2500MPa ASTM D638
- >70MPa ASTM D638
- >3% ASTM D638
- ≥2600MPa ASTM D790
- ≥100MPa ASTM D790
- >80D ASTM D2240
Versus other Photopolymer
See where it ranks against the 205 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-customtray-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.