Quick3D Formfutura High Performance Resin Rigid Ceramic
Formfutura LCD Resin · Photopolymer resin for LCD/MSLA
Get parts printed
Buy this materialStore coming soon
Overview
A nanoceramic-reinforced resin with very high stiffness and flexural strength, plus good heat and chemical resistance and a smooth matte finish.
Summarised from the Formfutura product page.
Features
- Material type
- Specialty
- Brand family
- Formfutura LCD Resin
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Formfutura
- Reinforcements
- Ceramic-filled
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Applications
- Industrial-grade rapid prototyping
- Short-run injection molds
- Fluid flow components
- Electrical casings
- Aerodynamic test models
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.62g/cm³
Thermal
- 72.0°C ISO 75-2, HDT-A 1.8 MPa
Mechanical
- 8500–9500MPa ASTM D638M
- 70–85MPa ASTM D638M
- 1% ASTM D638M
- 8500–9500MPa ASTM D2240
- 150–170MPa ASTM D790M
- 94D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formfutura-high-performance-resin-rigid-ceramic-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formfutura technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.