Quick3D Fiberon PETG-rCF08
Fiberon · PETG filament for FFF
Overview
PETG filled with 8% recycled carbon fiber, which raises strength and stiffness over plain PETG and gives a matte look that conceals layering. It keeps PETG's easy, low-warp printing and moisture resistance.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- Fiberon
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- Carbon Fiber
Characteristics
- RecycledContains recycled content, as stated on the manufacturer datasheet.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Certifications
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
- Prototyping
- Functional Parts
- Jigs & Fixtures
- Functional, load-bearing parts
- Jigs, fixtures and tooling
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.30g/cm³ ISO1183, GB/T1033
- 11.5 g/10min )%(noitprosbAg/10 min 230°C, 2.16 kg
- HB UL 94, 1.5mm
- OL, >1012 ΩΩ/sq ANSI ESD S11.11
Thermal
- 69.7°C DSC, 10°C/min
- 432.6°C TGA, 20°C/min
- 81.6°C ISO 306, GB/T 1633
- 65.7°C ISO 75 1.8MPa
Mechanical
- 3710.1 ± 151.1MPa ISO 527, GB/T 1040
- 59.8 ± 0.3MPa ISO 527, GB/T 1040
- 5.7 ± 1.0% ISO 527, GB/T 1040
- 3779.1 ± 40.6MPa ISO 178, GB/T 9341
- 94.6 ± 1.3MPa ISO 178, GB/T 9341
- 4.0 ± 0.9kJ/m² ISO 179, GB/T 1043
- 18.0 ± 1.1kJ/m² ISO 179, GB/T 1043
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)TDS_FIBERON-PETG-rCF08_V1.0_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.