Quick3D Fiberlogy PETG FR V0
Fiberlogy · PETG filament for FFF
Overview
A flame-retardant, halogen-free PETG rated UL94 V-0 that prints like standard PETG.
Summarised from the Fiberlogy product page.
Features
- Material type
- Engineering
- Brand family
- Fiberlogy
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Fiberlogy
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.26g/cm³ ISO 1183
- V-0 UL94
Thermal
- 70°C ISO 306
- 58°C ISO 75, 1.8 MPa
Mechanical
- 2350MPa ISO 527
- 25MPa ISO 527
- 40% ISO 527
- 3kJ/m² ISO 179, 23 °C
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBERLOGY_PETGV0_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Fiberlogy technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.