Quick3D Fiberlogy PETG ESD
Fiberlogy · PETG filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A static-dissipative PETG for protecting electronic components, combining ESD performance with PETG printability.
Summarised from the Fiberlogy product page.
Features
- Material type
- Engineering
- Brand family
- Fiberlogy
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Fiberlogy
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.3g/cm³ ISO 1183
- 10⁵ – 10⁸Ω/sq ASTM D257 1991
Thermal
- 85°C DSC
- 75°C ISO 75, 0.45 MPa
Mechanical
- 2545 (3D printed)MPa ISO 527
- 17.9 (3D printed)MPa ISO 527
- 8.0 (3D printed)% ISO 527
- 2260 (3D printed)MPa ISO 178
- 80.2 (3D printed)MPa ISO 178
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBERLOGY_ESD-PETG_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Fiberlogy technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.