Quick3D Fiberlogy Nylon PA12
Fiberlogy · PA12 filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
An engineering PA12 nylon filament with good heat, abrasion and chemical resistance and high elongation.
Summarised from the Fiberlogy product page.
Features
- Material type
- Engineering
- Brand family
- Fiberlogy
- Polymer
- PA12
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Fiberlogy
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.01g/cm³ ISO 1183
Thermal
- 178°C ISO 11357-3
- 145°C ISO 306
- 55°C ISO 75, 1.8 MPa
Mechanical
- 1400MPa ISO 527
- 45MPa ISO 527 (at yield)
- >50% ISO 527
- 12kJ/m² ISO 179, 23 °C
Versus other PA12
See where it ranks against the 17 other PA12 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBERLOGY_NYLONPA12_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Fiberlogy technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.