Quick3D Fiberlogy Nylon PA12+CF
Fiberlogy · PA12 filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A carbon-fibre-reinforced PA12 nylon giving high stiffness and strength with good heat resistance and lower moisture uptake than PA6.
Summarised from the Fiberlogy product page.
Features
- Material type
- Engineering
- Brand family
- Fiberlogy
- Polymer
- PA12
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Fiberlogy
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
- Automotive parts
- Engineering prototypes
- End-use industrial parts
- Functional, load-bearing parts
- Jigs, fixtures and tooling
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.07g/cm³ ISO 1183
Thermal
- 178°C ISO 3146
- 150°C ISO 75, 1.8 MPa
Mechanical
- 7300MPa ISO 527
- 120MPa ISO 527
- 5% ISO 527
- 15kJ/m² ISO 179, 23 °C
- 75kJ/m² ISO 179, 23 °C
Versus other PA12
See where it ranks against the 17 other PA12 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBERLOGY_NYLONPA12CF15_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Fiberlogy technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.