Quick3D Fiberlogy ABS+GF
Fiberlogy · ABS filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Glass-fibre-reinforced ABS that gives light, stiff and warp-resistant prints with good heat resistance.
Summarised from the Fiberlogy product page.
Features
- Material type
- Engineering
- Brand family
- Fiberlogy
- Polymer
- ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Fiberlogy
- Reinforcements
- Glass Fiber
Characteristics
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
- Drone parts
- Lightweight mechanical components
- Functional parts
- Functional, load-bearing parts
- Jigs, fixtures and tooling
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.12g/cm³ ISO 1183
Thermal
- 95°C ISO 306
- 80°C ISO 75, 1.8 MPa
Mechanical
- 3500MPa ISO 527
- 50MPa ISO 527
- 3.5% ISO 527
- 70MPa ISO 178
- 10kJ/m² ISO 179, 23 °C
- 30kJ/m² ISO 179, 23 °C
Versus other ABS
See where it ranks against the 21 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBERLOGY_ABSGF_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Fiberlogy technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.