Quick3D Liqcreate Composite-X
Liqcreate · Photopolymer resin for SLA/DLP/LCD
Overview
An extremely stiff, strong nano/micro-reinforced composite resin that can be used after UV curing or given an extra thermal cure to boost its properties. Aimed at rapid tooling, wind-tunnel models and industrial parts needing chemical resistance.
Summarised from the Liqcreate product page.
Features
- Material type
- Engineering
- Brand family
- Liqcreate
- Polymer
- Photopolymer
- Processing technology
- SLA/DLP/LCD
- Material form
- Resin
- Manufacturer
- Liqcreate
- Reinforcements
- Nano-micro composite
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.62g/cm³ Internal method (solid)
Thermal
- 86°C ISO 75, 0.45 MPa (UV + thermal)
Mechanical
- 8500–9500MPa ASTM D638 (UV + thermal: UV 60 min at 60 °C + thermal 120 min at 100 °C)
- 70–85MPa ASTM D638 (UV + thermal: UV 60 min at 60 °C + thermal 120 min at 100 °C)
- 1% ASTM D638 (UV + thermal: UV 60 min at 60 °C + thermal 120 min at 100 °C)
- 8500–9500MPa ASTM D790 (UV + thermal: UV 60 min at 60 °C + thermal 120 min at 100 °C)
- 150–170MPa ASTM D790 (UV + thermal: UV 60 min at 60 °C + thermal 120 min at 100 °C)
- 94D ASTM D2240 (UV + thermal)
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)composite-x Download
- Quick3D summaryThis page as a printable PDF
Values from the Liqcreate technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.