Quick3D Overview
A PC/ABS blend filament that pairs the strength and heat resistance of polycarbonate with the impact resistance of ABS. It suits prototyping, tooling and low-volume production.
Features
- Material type
- Engineering
- Brand family
- FDM
- Polymer
- PC/ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Stratasys
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.10g/cm³ Specific gravity, ASTM D792, @ 23 °C
Thermal
- 105.3°C ASTM D7426, inflection point
- 107.5°C ASTM D648 Method B, 264 psi
Mechanical
- 1990 ± 38MPa ASTM D638
- 34.7 ± 0.83MPa ASTM D638 (strength at break)
- 4.7 ± 0.75% ASTM D638
- 1860 ± 140MPa ASTM D790, Procedure A
- 61.9 ± 1.2 (at 5% strain)MPa ASTM D790, Procedure A
Electrical
- 2.62 ASTM D150, 1 kHz (XY)
Versus other PC/ABS
See where it ranks against the 6 other PC/ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)MDS_FDM_PC-ABS_0823a.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Stratasys technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.