Quick3D Polymaker PolySupport-PA12
PolySupport · PA12 filament for FFF
Overview
Breakaway support filament designed for Nylon 12 and other long-chain nylons, removed by hand without solvents or tools; not intended for PolyMide CoPA.
Summarised from the Polymaker product page.
- Material type
- Support
- Brand family
- PolySupport
- Polymer
- PA12
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- Dissolvable supportSupport material that is removed after printing — dissolved or broken away.
Certifications
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.29g/cm³ ISO1183, GB/T 1033
- 12g/10 min 260°C, 5kg
Thermal
- 371°C TGA, 20°C/min
- 171°C ISO 306, GB/T 1633
- 53°C ISO 75 1.8MPa
Chemical resistance
Versus other PA12
See where it ranks against the 17 other PA12 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)TDS_Polymaker_PolySupport-PA12_v5.5_2026-01-14_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.