Quick3D Polymaker PolyMax-PC
PolyMax · PC filament for FFF
Overview
Engineering polycarbonate filament that is strong, tough and handles high heat; it needs an enclosed printer able to hold a warm chamber. Used for tooling, working prototypes and finished parts.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- PolyMax
- Polymer
- PC
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Certifications
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.19g/cm³ ISO1183, GB/T 1033
- 6-8g/10 min 260°C, 1.2kg
Thermal
- 113°C DSC, 10°C/min
- >360°C TGA, 20°C/min
- 117°C ISO 306, GB/T 1633
- 99°C ISO 75 1.8MPa
Mechanical
- 2435 ± 63MPa ISO 527, GB/T 1040
- 53.44 ± 0.60MPa ISO 527, GB/T 1040
- 4.53 ± 0.45% ISO 527, GB/T 1040
- 2050 ± 79MPa ISO 178, GB/T 9341
- 81.29 ± 1.53MPa ISO 178, GB/T 9341
- 21.28 ± 1.69kJ/m² ISO 179, GB/T 1043
Chemical resistance
Versus other PC
See where it ranks against the 13 other PC materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)TDS_Polymaker_PolyMax-PC_V5.5_2026-01-05_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.