Quick3D Markforged Onyx
Markforged · Nylon filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Onyx is Markforged's micro carbon fibre filled nylon composite base material. It can be printed on its own or reinforced with any of Markforged's continuous fibres and is noted for its surface finish, chemical resistance and heat tolerance.
Features
- Material type
- Engineering
- Brand family
- Markforged
- Polymer
- Nylon
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Markforged
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.2g/cm³
Thermal
- 145°C ASTM D648 Method B (0.45 MPa)
Mechanical
- 2400MPa ASTM D638
- 37MPa ASTM D638
- 25% ASTM D638
- 3000MPa ASTM D790 (method similar to D790)
- 71MPa ASTM D790 (method similar to D790)
Versus other Nylon
See where it ranks against the 5 other Nylon materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Onyx®.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Markforged technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.