Quick3D HP 3D HR PP
HP 3D High Reusability · PP powder for MJF
Get parts printed
Buy this materialStore coming soon
Overview
HP 3D HR PP, enabled by Forward AM, is a genuine polypropylene powder for the HP Jet Fusion 5200 that produces chemically resistant, weldable parts with low moisture uptake. It is HP's lowest-cost MJF material with up to 90% surplus powder reuse.
Features
- Material type
- Engineering
- Brand family
- HP 3D High Reusability
- Polymer
- PP
- Processing technology
- MJF
- Material form
- Powder
- Manufacturer
- HP
- Reinforcements
- None
- Manufacturer SKU
- V1R29A, V1R28A, V1R37A
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 0.87g/cm³ ASTM D792
Thermal
- 138°C ASTM D3418 (powder, DSC)
- 60°C ASTM D648 (1.82 MPa)
Mechanical
- 1600MPa ASTM D638 (XY)
- 29MPa ASTM D638 (XY)
- 16% ASTM D638 (XY)
Versus other PP
See where it ranks against the 16 other PP materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)HP-PP-HR_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the HP technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.