Quick3D HP 3D HR PA 12 FR
HP 3D High Reusability · PA12 powder for MJF
Overview
HP 3D HR PA 12 FR, enabled by Evonik, is a halogen-free flame-retardant nylon 12 powder for the HP Jet Fusion 5600 that reaches UL94 V-0 at 2.5 mm. It offers 60% powder reusability and a smooth surface finish.
Features
- Material type
- Engineering
- Brand family
- HP 3D High Reusability
- Polymer
- PA12
- Processing technology
- MJF
- Material form
- Powder
- Manufacturer
- HP
- Reinforcements
- None
- Manufacturer SKU
- AN5S8A, AN5S9A, AN5T0A
Characteristics
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.13g/cm³ ASTM D792
- V-0 UL 94 (2.5 mm)
- 9.74 x 10¹⁴Ω/sq ASTM D257 (23 °C / 50% RH, XY)
Thermal
- 187°C DSC analysis
- 97°C ASTM D648 (1.82 MPa)
Mechanical
- 2580MPa ASTM D638 (XY)
- 46MPa ASTM D638 (XY)
- 4.7% ASTM D638 (XY)
Electrical
- 7.6kV/mm ASTM D149 (48 h / 23 °C / 50% RH, XY)
Versus other PA12
See where it ranks against the 17 other PA12 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)HP-PA12-FR-HR_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the HP technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.