Quick3D Formlabs PU Rigid 1000 Resin
Formlabs SLA · Polyurethane resin for SLA
Get parts printed
Buy this materialStore coming soon
Overview
A semi-rigid, tough polyurethane resin made for stiff parts that must survive repeated impacts and harsh environments.
Summarised from the Formlabs product page.
Features
- Material type
- Engineering
- Brand family
- Formlabs SLA
- Polymer
- Polyurethane
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLPU1001
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
- UL 94 HBFlammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
Ask us for the certificate if you need it for an audit.
Applications
- Protective casings, housings and enclosures
- Static jigs and fixtures under high stress
- Sturdy consumer products
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.16g/cm³ ASTM D792-20
- HB UL 94
Thermal
- 131°C DMA; Tg2 shown, Tg1 -22 °C
- 64°C ASTM D648-16, 1.8 MPa
Mechanical
- 920 ± 90MPa ASTM D638
- 35 ± 3.5MPa ASTM D638
- 80 ± 8% ASTM D638
- 750 ± 30MPa ASTM D790-15
- 32 ± 1.6MPa ASTM D790-15
- 23kJ/m² ISO 179-1:2010(E)
- 74D ASTM D2240
Electrical
- 4.3 ASTM D150, 1.0 MHz
Versus other Polyurethane
See where it ranks against the 1 other Polyurethane material we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-purigid1000-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.