Quick3D 3DXTECH ThermaX TPI
ThermaX · TPI filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
3DXTECH ThermaX TPI is a high performance TPI filament for FFF printing, made by 3DXTECH.
- Material type
- High Performance
- Brand family
- ThermaX
- Polymer
- TPI
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (base resin, datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.3g/cm³ ISO 1183
- V-0 UL 94, 0.75 mm (base resin)
Thermal
- 247°C DSC
- 237°C ISO 75, 0.45 MPa
Mechanical
- 2950MPa ISO 527
- 74MPa ISO 527
- 6% ISO 527
- 2856MPa ISO 178
- 110MPa ISO 178
Downloads
- Technical data sheet (TDS)Thermax_TPI_TDS_TDS_v1.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.