Quick3D 3DXTECH ThermaX PSU
ThermaX · PSU filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A polysulfone (PSU) filament with excellent thermal and chemical resistance, offered as a lower-cost, lower-density alternative to ULTEM 9085. A higher Tg and HDT provide better strength and stiffness when hot.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- ThermaX
- Polymer
- PSU
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.24g/cm³ ISO 1183
- >10¹³Ω/sq IEC 60093
Thermal
- 187°C DSC
- 172°C ISO 75, 0.45 MPa
Mechanical
- 2100MPa ISO 527
- 52MPa ISO 527
- 8% ISO 527
- 2050MPa ISO 178
- 87MPa ISO 178
Downloads
- Technical data sheet (TDS)THERMAX_PSU_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.